Skip to content

Autotronics.eu

Peugeot & Citroen Sat Nav GPS Magneti Marelli RT3 systems

DSC02377_440.jpg

The Magneti Marelli RT3 systems are fitted on various models of vehicles, such as Peugeot, Citroen, Fiat and Lancia.

Models include:

Peugeot: 307, 807, 407, 607

Citroen: C3, C4, C5 and C8

Fiat ulysse and Lancia Phedra

The RT3 headunit is an all-in-one satellite navigation, telephone, radio, cd, MP3 headunit.

There are two types of RT3, one is for CAN-bus vehicles and the other is for VAN-bus vehicles.

Also, on each type, There is one for colour display and the other for monochrome display.

I can supply, and configure RT3 headunits to your vehicle, i have various types of RT3 in stock, so if you are looking for one, please get in touch.

180 thoughts on “Peugeot & Citroen Sat Nav GPS Magneti Marelli RT3 systems”

  1. Hi again. I would like to remove the head unit to check the card. Do I need any special tools like the 2 metal prongs used to remove head units. I only ask as I dont have any but could I knock a couple up or use something else. If when removed is the card like a motherboard with chips & capacitors etc, if so It might show signs of failure or not. Also is the attenna only for the GPS. I ask because the radio signal is fine.
    Thanks

  2. Ok. thanks for your info. My car has to go in for repairs at Welwyn garden city soon for a couple of weeks. How far are you from there & do you make visits. Thanks again

  3. hello there, i’m hoping you can help…..i have a 53 plate 2004 307 sw with the rt3 head, 5 disc changer and full colour screen….the changer accepts discs but won’t play anything, the head unit works fine apart from it won’t pull a disc in so won’t play a disc. the radio/phone etc is ok, but after a longish run the system is overheating and comes up with various messages such as ‘volume reduced due to overheat/system will shut down/telephone stopped working’ etc. i presume this is because the header is ‘trying’ to do something with the disc but is unable to, thus, using more power and creating more heat. so, a, can the problem with the ‘disc accepting’ mechanism be sorted? b, is there a way to connect up a usb lead to the head unit using the 5 disc changer connecting cable (as you can with the rt4 and rt5 as i’ve seen in your previous posts) or, c, would it be easier to just chuck the whole lot and go for an aftermarket headunit and not have the screen working, as the only thing that would be missing is the clock and outside temperature.
    if there’s any suggestions you could make, that would be helpful, but i’m losing patience rather rapidly with what is otherwise a decent car.
    thanks for your time, regards….wilf

  4. hi i have a 807 with the satnav/cd/radio in it i think its a rt4? everything works apart from the radio which works for a couple of seconds the i just get hissing please help as its doing my nut in cheers

  5. Hi there,
    I bought a Peugeot 307 but my navigator is French language. I can’t change the Language to English. It always request for a CD to be inserted so I can change it which I do not have. How can I have one please? Can anyone help?

    Grateful in anticipation.

  6. Hello,
    My girlfriend in Belgie needs an other screen for her Peugeot 307 cc build in 2004,
    she wants to know the numbers on the backside of the screen, the first numbers have to be 9653……….., please can you check it and let me know.
    According the Peugeot garage the first four numbers have to start with 9653…. otherwise it’s not competable with the system.

  7. Hi im looking for a gps system for my peugeot 307 year 2007 it has a standard stereo factory fitted but im looking for a rt3 system please thank you get back to me asap thanks

  8. Hiya, just wondered if you know where I might be able to get update software? I am currently running v5.41 and could do with updating.
    Thanks

Leave a Reply

Your email address will not be published. Required fields are marked *